top of page
  • Writer's pictureJohn C

WD40 PTFE Dry: The Best Way to Protect Your Mower Deck (Plastic or Metal)







Your mower deck is one of the most crucial parts of your lawn mower, ensuring it remains in optimal condition is key. One effective method of achieving this is by applying WD-40 PTFE Dry.


What is WD-40 PTFE Dry?

WD-40 PTFE Dry is a synthetic lubricant crafted to shield metal and plastic surfaces from the harsh effects of rust and corrosion. Its water-resistant nature makes it a perfect companion for mower decks.



Benefits of Using WD-40 PTFE Dry on Your Mower Deck

Utilizing WD-40 PTFE Dry on your mower deck comes with a plethora of benefits:

  • Protects from rust and corrosion: WD-40 PTFE Dry forms a protective layer on the metal or plastic surface of your mower deck, acting as a shield against rust and corrosion.

  • Reduces friction and wear: By minimizing friction and wear on the moving parts of your mower deck, WD-40 PTFE Dry assists in prolonging its lifespan.

  • Eases cleanup: The application of WD-40 PTFE Dry simplifies the cleaning process of your mower deck as grass and dirt are less likely to adhere to it.

  • Extends the life of your mower deck: Regular usage of WD-40 PTFE Dry can contribute to extending the life of your mower deck, ensuring smooth operation for the years to come.




A hand holding a water hose pipe and spraying water on a lawn mower deck, to clean it, before applying WD-40 PTFE Dry.
Cleaning the lawn mower deck, before applying WD-40 PTFE Dry

How to Use WD-40 PTFE Dry on Your Mower Deck

Utilizing WD-40 PTFE Dry on your mower deck is a straightforward process:

  1. Clean the mower deck using a hose or pressure washer to eliminate any dirt or debris.

  2. Vigorously shake the can of WD-40 PTFE Dry.

  3. Evenly spray WD-40 PTFE Dry across the entire surface of the mower deck.

  4. Allow WD-40 PTFE Dry to dry thoroughly before operating your mower.


Frequently Asked Questions about WD-40 PTFE Dry


Q: How often should I spray WD-40 PTFE Dry on my mower deck?

A: It's advisable to spray WD-40 PTFE Dry on your mower deck at least once a month, or more frequently if residing in a wet or humid climate.


Q: Can I use WD-40 PTFE Dry on other parts of my lawn mower?

A: Absolutely, WD-40 PTFE Dry can be applied to any metal or plastic surface on your lawn mower, including the blades, spindles, and engine.


Q: Is WD-40 PTFE Dry safe for my lawn and plants?

A: Yes, WD-40 PTFE Dry is a safe choice for your lawn and plants being a non-toxic and non-flammable lubricant.



JC's Conclusion

WD-40 PTFE Dry offers an exceptional solution for guarding your mower deck against rust and corrosion, extending its longevity, and simplifying cleanup. If the upkeep of your mower deck is a priority, WD-40 PTFE Dry is your go-to solution, irrespective of whether your deck is made of plastic or metal.






Note: The link provided is an affiliate link, which means I may earn a small commission at no extra cost to you if you make a purchase. It helps support my work and allows me to continue providing valuable content like this.

3 則留言

評等為 0(最高為 5 顆星)。
暫無評等

新增評等
訪客
5月22日

This is probably the worst type of product information from someone cashing in. I think everybody is aware of the benefits of the product without these comments. We all no how long WD40 has been going as a trade name and what it can do.

按讚
訪客
5月22日
回覆

I recognise this guy he seems genuine he delivered some amazon products to me a few years ago he's just an amazon driver leave him alone

按讚
bottom of page